How to Add Scent to a Candle

Candle can go from merely lighting up a room to freshening up the entire area with its fragrance. You can place a scented candle in the bedroom, beside the bath, or on a coffee table in the living room, so that you and your guests can have an easier time to lighten up and relax.

Unfortunately, scented candles have become so popular that many stores have raised their prices way too much. While you may love lighting a candle and inhaling the soothing aroma that wafts from its wick, your pockets may not be as happy. There is a solution to this, though, and that is to add your own scent to a store-bought, fragrance-free candle.

Step 1: Choose Fragrance Oils

Make sure that you understand how fragrance oils work before you actually use them for your candles. There are fragrance oils that are inappropriate for adding scent to a candle; therefore, you should always ask the salesperson. It is also important to note the temperature at which the oils will burn. Likewise, note the concentration of the oils.

Step 2: Melt the Candle Partially

Light a candle and let it burn for several minutes until an inch-deep pool of melted wax has grown around the wick. Blow out the candle.

Step 3: Pour the Fragrance Oil

Use the eye-dropper to add a few drop of fragrance oil into the pool of melted wax. How much you want to add depends on how rich a scent you want to have. 3 to 4 drops into the melted wax will assure you of a light fragrance. If you want a steadier, fuller scent, pour at least a couple more. As an alternative, you can also place a few drops of your fragrance oil in your basket of potpourri or reed diffuser to maintain the room’s fragrance, even when you have not lighted a candle.

Step 4: Stir the Melted Wax

Use a toothpick and begin with small circles at the center of the melted wax and gradually extend to the outer edges of the candle. Blend the fragrance oils thoroughly into the wax to avoid pockets of unmixed oil catching up in flames.

Step 5: Let the Wax Cool

Allow the melted wax to cool for a few minutes before lighting up the candle again. This will allow the fragrance oil to be absorbed into the candle.

Step 6: Test If the Scent Works on the Candle

Light the candle again. You should be able to detect the scent easily while within inches of the lighted candle and the room should also be filled with a light fragrance.

Step 7: Add More Fragrance Oil

Repeat Steps 3 to 5 if you have put out the candle and want it to emit a scent once lighted up again. This way, you can enjoy the same lovely fragrance the next time you want to light it.

Always be careful when adding scent to a candle. Never ever pour fragrance oil when the candle is burning or else you will risk burning yourself.

D.I.Y. How to Make Your Own Aromatherapy Oils

Distilling essential oils is a long process, and it means quite a large capital outlay for a small amount of oil. Buying essential oils is also expensive, but there is a way you can get the therapeutic benefits of aromatic oils and vinegars quite cheaply at home.




Instructions:

To begin, you will need a collection of clean, sterilized bottles and jars. You can recycle jam jars, and glass bottles, but you need to wash them thoroughly first in hot soapy water, then boil in a large saucepan for 20 minutes.

You will need at least one standard American cup of plant material. For your first attempts, use strongly aromatic plants like lavender, rose petals or rosemary. These will give you an oil that can be put to many uses around the home.

The oil you use should be related to the purpose you have in mind – you can use baby oil or almond oil for cosmetics, safflower or canola for general purposes, and olive oil for cooking.

Place the plant material in your jar or bottle. If you are using a bottle, you can push stems of lavender or rosemary into the bottle.

Now pour the oil over the plant material, making sure the bottle or jar is full. As a rough rule of thumb, use two cups of oil to one cup of plant material. You don't need to warm the oil before you pour it in the bottle or jar.

Now cap the bottle or jar tightly and place it in a warm spot. This could be a sunny place on the veranda or windowsill, or in a warm cupboard, such as an airing cupboard or next to the hot water heater. Leave the oil to infuse for a few days, or until the plant material begins to brown. Take the cap off and sniff - if it is not strong enough for you, strain the liquid, fill the jar with fresh plant material, and pour the oil back over it. Leave for another few days. Keep doping this until the mixture is as aromatic as you want.

Additonal Tips:

If the plant material used is very strong, such as a strongly scented rose, or jasmine, you should get a good scent just changing the plant material once or twice.

When the oils are done to your liking, strain thoroughly and put in a clean bottle. Keep your aromatic oil in a cool place, or add to recipes for lotions and creams.

For example, if you want a rose scented cleansing cream, make up a batch of rose oil and add a tablespoon to a jar of plain sorbolene cream and whip it up. To make a wrinkle fighting night cream, add the contents of six Vitamin E oil capsules and whip them in as well.

You can use any strongly scented flower petals, and the range is as wide as the scented flowers in your garden. Try jasmine, frangipani, honeysuckle, marigold, violets - the choice is endless.

For culinary use, put some sprigs of herbs, such as rosemary, thyme or basil, into a tall bottle, and pour over good quality cooking oil such as safflower or olive. You can also add garlic, chilies or whatever seasoning takes your fancy. Leave where the sun can warm the bottles for a couple of weeks.

You use the same method for making aromatic vinegar. Choose a good quality wine or apple cider vinegar and pour it over your herb sprigs. Leave for a few days in a warm place and you will have a delicious addition to salad dressings.

By Gail Kavanagh of Gardening, Decor & Home Improvement